01
Thermal insulation
Balances extreme summer/winter swings, pulling surface temperature into the comfort band.
Four Seasons · One Protection
Thermal paint for four-season heat, water & sound insulation
Since 1962 we unite heat, water, sound, moisture and fire resistance in a single water-based thermal coating. As you scroll, watch the temperature gap between an untreated surface and one protected by ISO THERMAL.
By the Numbers
Over half a century in thermal insulation & isolation
Continuous production, R&D and field application in thermal paint, heat insulation and isolation since 1962.
1962
Established
0
Years of R&D
0
Years in the field
0+
Provinces + abroad
Safe Insulation, Safe Future
Water-based thermal insulation & isolation solution
Since 1962, an engineering-led insulation and isolation brand uniting heat, water, sound, moisture and fire resistance in a single water-based thermal coating.
University R&D collaborations
TS EN 13813 — A12 abrasion class
Water-based, eco & building friendly
Nationwide + international experience
Learn more
Thermal proof
Thermal insulation performance proven by thermal camera
Thermal-camera measurements make the thermal-insulation difference ISO THERMAL creates in a single coat visible. The water-based coating reflects radiant solar heat and filters conductive heat, pulling surface temperature into the comfort band.
While the natural seasonal difference is only 8-10°C, ISO THERMAL delivers a surface drop of up to 25-30°C — a direct saving on heating and cooling costs.
Why ISO Thermal
16 insulation advantages in one thermal coating
One water-based coating: heat insulation, waterproofing, sound insulation, fire and mould protection — each backed by field and laboratory data.
02
Water insulation
Mass loss of 0.092 under atmospheric pressure (limit 0.1) — a proven barrier against water.
03
Frost resistance
Functional even at −25/−30 °C; mass loss 0.34% (well below the 1% limit).
04
Sound insulation
A complementary acoustic layer that reduces traffic, site and ambient noise.
05
Protection in one coat
No repeated applications — superior, integrated protection in a single coat.
06
Lightweight
600-650 g/m² consumption; adds no load to the structure.
07
Fire-retardant
540 °C threshold; burns with flame but self-extinguishes — not a spreader.
08
Eco & building friendly
Water-based formulation; contains no harmful substances.
09
Energy & cost saving
Minimises heating/cooling bills and shortens payback time.
10
Easy application
One person, 70-80 m²+ per day; roller, brush, trowel or spray.
11
Wide range of use
10 distinct application areas — from architecture to logistics, energy to agriculture.
12
Insulation + paint in one
One solution instead of two; tintable, even re-colourable after application.
13
Flexible, crack-resistant
Elasticity that prevents hairline cracks; resistant to breaking and peeling.
14
Breathable
Allows vapour diffusion; prevents darkening, mould and efflorescence.
15
Antibacterial
Inhibits bacteria, fungi, mould and micro-organisms — a hygienic surface.
16
Long lasting
TS EN 13813 A12 abrasion class; acid, salt and UV resistance for years of performance.
Applications
Heat & water insulation across 10 applications
From façade insulation and roof isolation to containers, silos and energy storage — ISO THERMAL delivers heat and water insulation to the same engineering standard on every surface.
01 · Exterior heat, water and sound insulation — a versatile alternative to cladding.
Architecture & Concrete Structures — Façade
02 · Antibacterial protection against heat, sound, moisture and mould on interior walls.
Interior Walls
03 · Direct energy savings on the surfaces where heat loss is greatest.
Roof, Terrace & Deck
04 · Controls outside→inside temperature on panel structures, cutting cost.
Prefab Structures & Warehouses
05 · Thermal stability and fire safety for battery, solar and wind sites.
Energy Storage Facilities
06 · A corrosion barrier and longer life for sea and land containers.
Shipping Containers
07 · Minimises cooling energy in cold stores and refrigerated transport.
Cold Chain Logistics
08 · Controls moisture, mould, temperature and air transfer inside silos.
Grain Stores & Silos
09 · Thermal protection of internal units in outdoor cabinets.
Power Cabinets (Telecom, Transformer, EV)
10 · UV resistance, colour retention and coolness on flexible surfaces.
Awnings, Pergolas, Tarpaulins & Tents
Application methods
Applicable surfaces & Application methods
Since 1962, an engineering-led insulation and isolation brand uniting heat, water, sound, moisture and fire resistance in a single water-based thermal coating.
01
Roller
Fast, even coverage on large flat surfaces.
02
Brush
Precise application on details and corners.
03
Trowel
For thick coats and textured finishes.
04
Spray gun
High-throughput spraying on large areas.
Beton
Tuğla
Şap
Şingıl
Metal
Trapez
Ondulin
Eternit
Pergole
Polietilen
Polikarbon
Demir
Products
Our thermal insulation coatings
Flagship
Sound, Heat & Water Insulation Coating
Triple insulation power — sound, heat and water in one product.
Learn more
DZT-444
Façade Concrete & Membrane (Shingle) Insulation
Watertight, high-performance heat and water insulation for façades.
Learn more
MT-316
Thermal Primer (Insulation)
Lightweight, flexible, 100% recyclable thermal primer.
Learn more
PTS-212
Pergola, Zinc & Metal Insulation
Thermal barrier on metal and zinc surfaces, UV and weather resistant.
Learn more
SM-412
Interior Wall Insulation Coating
Superior heat + 10-12 dB sound insulation on interior walls.
Learn more
SM-413
Antibacterial Interior Insulation Coating
Antibacterial + heat + 10-15 dB sound; hygienic interiors.
Learn moreQuality & Assurance
Certified thermal insulation & isolation quality
ISO THERMAL’s thermal insulation and isolation performance is documented by international management-system certificates and an independent university test report.
Frequently Asked Questions
The most common questions about thermal paint and heat insulation.
What is thermal paint?
Thermal paint is a water-based insulation coating that reduces heat transfer when applied to a surface. In İSO THERMAL it also provides water, sound, moisture and fire resistance; it is applied like paint and comes in a bucket.
Does thermal insulation paint really work?
Yes. In field measurements an untreated façade reaches 70-75 °C in summer while an İSO THERMAL surface stays at 40-45 °C. Given a natural seasonal difference of only 8-10 °C, this 25-30 °C gap proves its effect.
Thermal paint or external cladding?
Cladding adds thickness with thick boards; thermal paint is thin, light (600-650 g/m²) and versatile — combining heat, water, sound, moisture and fire resistance in one coat across almost any surface. Depending on need, the two can complement each other.
Which surfaces can it be applied to?
It bonds with strong adhesion (8 N/mm²) and no primer to almost all building surfaces including concrete, brick, screed, shingle, metal, trapezoidal sheet, onduline, fibre-cement, pergola, polyethylene and polycarbonate.
From our channel
Insulation application videos
Field footage of thermal paint and insulation applications — the latest shorts from our YouTube channel.
Contact Us
Let’s plan the right heat insulation for your structure
Share your application area and surface; our team will offer the most suitable ISO THERMAL thermal-paint solution and a free survey plan.